 | Home | View Cart | My Account | Order Status |
|
|
Features: |
• | Ultra compact bike stand; folds down small enough to fit in the glove box or gear bag• Aluminum/Plastic• Won't harm bike's finish• Maximum Weight Capacity: 30.8 pounds• Dimensions: 19.7 by 8.9 inches; folded Dimensions: 7.5 by 3.1 by 1.8 inches (L x W x H)Product Details: |
Customer Reviews: |
Average Customer Review:
|  ( 15 customer reviews )
Write an online review and share your thoughts with other customers. Most Helpful Customer Reviews 24 of 25 found the following review helpful:  Not a true work standJan 03, 2007By D. Stolzberg I held high hopes for the product - being that I live in a little apartment in NYC, I was looking forward to saving space. The tune-up stand is little/portable, however it was not too sturdy. The bike, while on the stand, will not withstand much torque at all. The bike fell over many times before I gave up and purchased another bigger/more sturdy stand. Forget about turning the crank, the slightest movement of the crank creates too much torque for the little stand and the bike falls over. This stand would be good for LIGHT work - possibly a light tuning of the brakes or a wipe down with a rag. Any pressure whatsoever would necessitate a bracing hand on the frame of the bike. Overall a 2/5 because it may be okay for a little person's bike or a bmx. I used it on a men's road bike size 57. 28 of 30 found the following review helpful: Has a plastic pieceAug 18, 2006By D. Blackington Topeak chose to build this with one hard plastic piece which is it's weakest link. The rest is built with strong parts. The hard plastic piece bends and will break with maybe 50 lbs of force (I didn't test it). The bending creates less stability in addition to the weakness of the plastic. If they had paid a little extra for an aluminum piece, it would probably hold at least 100 lbs. It's a shame to have all strong parts which can hold 100 lbs and then decide on one weak piece which can only hold 50. A stand is only as strong as it's weakest leak, of course. It's use is really only to be a portable stand you can take on rides. If you're going to use a stand at home, get atleast a chainstay/seat stay stand. I got one at performance for $25, and it can hold 100 lbs and works both on my tandem and single bike. It also lifts the tire up a little higher. 20 of 21 found the following review helpful: Practic and usefull but....Aug 22, 2006By Shagui It's a very practical device with a big problem: It's very flimsy, you put your bike and it bends and almost the tire touches the floor, some times it touches the floor making your job hard to execute it (washing, lubricating the chain etc.) Topeak have to redisign it or reconsider to build it with metal or a harder material. The general design is very good, you bend it and put it in a bag, very usefull when you travel by car, or to do some repairs at home and you don't have room to store a big professional style BIKE STAND 8 of 8 found the following review helpful: It has potential, but....May 21, 2007By EMS Pilot I cannot recommend this device for most people. This little stand, while cute and convenient to tote along in your larger tool kit, is too flimsy and unstable for anything more than very delicate work. Lube your chain carefully, or check your rear tire for debris. It even says in the included instructions "not to spin the tire rapidly, or apply the brakes abruptly". If you do it will fling itself to the ground. The stand is also rated for no more than 30lbs, so is unsafe to use on larger hybrids or mountain bikes. If only the legs opened a little wider, or they used aluminum in place of the soft plastic, I would be willing to pay more for the convenience. Even setting on a level blacktop surface, my best road bike was knocked over with a slight gust of wind. I spent more on deraileur repairs after that than the darned stand cost! 2 of 2 found the following review helpful: I have had this unit foreverJan 28, 2011By Gary Willcox "GreaseIsDWord" I bought it from a cycling distribution rag even before Al Gore invented the internet. At first I liked it, but it started to bug me after a while. First is that it stands the bike up too high even on it's lowest setting -- the back wheel is several inches up in the air. Not a big deal, but somewhat of a pain. The next issue was when I graduated from my steel frame bikes to carbon, the "cradle" that holds the bottom bracket is just plain not big enough. It allows the BB area of the frame to slip and slide all over. The last thing that really sent it over the edge was the plaastic piece that joins the main body to the single arm that goes around the downtube, split in half. I was just putting a rack on the bike, so it wasn't like I was really wrenching on it. I called Topeak who is usually excellent in CS, and they said they don't offer replacement parts for this device. So, I would stay away since the design is a bit old (small tubes), and it could have the tendency like mine to break. I'm going to try to epoxy it back, but we shall see. I own many, many Topeak products, pumps, racks, bags for racks, you name it and they are very well engineered. This is by far my least favorite of the Topeak lineup. See all 15 customer reviews on Amazon.com
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
based on 15 reviews
| |||
| |||
| Privacy Policy | Copyright © , Performance Downhill. All rights reserved. | ||
 |